Skip to Content

Classification Search

Print page
Classification Phraseology as of:
1/1/2018
 
Classification Code:
3081
 
Phraseology:
FOUNDRIES — iron — N.O.C.
Footnote:
This classification applies to foundries that produce iron castings, including incidental processing operations such as the removal of gates, risers, burrs and flash.

This classification includes the manufacture of foundry sand cores that are used in the employer's foundry operations.

The machining and assembly of castings to produce finished parts or products, including but not limited to water meter covers, pump housings, fire grates, weights, bolt anchors and gas burners shall be separately classified.

The manufacture of patterns for use in foundry operations shall be separately classified as 2790, Pattern or Model Mfg.

The casting of nonferrous metal shall be separately classified as 3085, Foundries — nonferrous, in accordance with the provisions of the Multiple Enterprises rule.

The casting of steel shall be separately classified as 3082, Foundries — steel castings, in accordance with the provisions of the Multiple Enterprises rule.

Die casting shall be classified as 1925, Die Casting Mfg.

The manufacture of metal castings, either ferrous or nonferrous, by the lost wax or investment process shall be classified as 3339, Foundries — investment casting.

Approved Pure Premium Rate:
To learn how approved pure premium rates are different than insurer rates, click here.
Effective DatePure Premium RateNote
1/1/2018$10.37New/Renewal
7/1/2017$11.70New/Renewal
1/1/2017$12.68New/Renewal
Prior Phraseology and Footnote:
Shown below is the previously published phraseology and footnoteEffective Date

FOUNDRIES — iron — N.O.C.

This classification includes the manufacture of foundry sand cores that are used in the employer's foundry operations.

1/1/2016
New Search

The Classification Search was developed by the WCIRB for your convenience to help you identify Standard Classifications based on keywords or a classification code. However, you cannot rely solely on the Classification Search and must make an independent assessment when determining the appropriate classification(s) assignable to a risk in accordance with the USRP.