IRON OR STEEL WORKS — structural — shop — fabricating or assembling girders, beams, columns, trusses, stringers or other structural iron or steel
This classification applies to the fabrication of structural iron or steel components, including but not limited to girders, beams, columns, trusses, communications towers, light standards and stringers from materials such as "I", "H" or "C" beams; channel, angle or bar stock; pipe; tubing; and sheet plate.
The erection of structural steel shall be separately classified.
Employers engaged in the fabrication of both structural and non-structural iron or steel products shall be classified as 3030 if 50% or more of the shop time is devoted to the fabrication of structural iron or steel products. If more than 50% of the shop time is devoted to the fabrication of non-structural iron or steel products, the operations shall be classified as 3040, Iron or Steel Works — non-structural.
The fabrication of miscellaneous non-structural metal products shall be classified as 3620(2), Plate Steel Products Fabrication, if more than 50% of the metal used is #9 gauge or heavier.
The cutting, bending, forming or assembly of reinforcing steel at a permanent shop or yard shall be classified as 3039, Reinforcing Steel Fabrication.
Shown below is the previously published phraseology and footnote | Effective Date |
---|---|
Phraseology: This classification applies to the fabrication of structural iron or steel components, including but not limited to girders, beams, columns, trusses, communications towers, light standards and stringers from materials such as "I", "H" and "C" beams; channel, angle and bar stock; pipe; tubing; and sheet plate. The erection of structural steel shall be separately classified. Employers engaged in the fabrication of both structural and non-structural iron or steel products shall be classified as 3030 if 50% or more of the shop time is devoted to the fabrication of structural iron or steel products. If more than 50% of the shop time is devoted to the fabrication of non-structural iron or steel products, the operations shall be classified as 3040, Iron or Steel Works — non-structural. The fabrication of miscellaneous non-structural metal products shall be classified as 3620(2), Plate Steel Products Fabrication, if more than 50% of the metal used is #9 gauge or heavier. The cutting, bending, forming and assembly of reinforcing steel at a permanent shop or yard shall be classified as 3039, Reinforcing Steel Fabrication. | 9/1/2021 |
The Classification Search was developed by the WCIRB for your convenience to help you identify Standard Classifications based on keywords or a classification code. However, you cannot rely solely on the Classification Search and must make an independent assessment when determining the appropriate classification(s) assignable to a risk in accordance with the USRP.